
We love taking your trade-ins and well-used equipment off of your hands. Any machine that we bring in goes through a thorough inspection process and is available for viewing prior to purchase. Our inventory is constantly changing, and not everything is available on our site. If you have any questions, or you are looking for a specific machine, give us a call and we would be happy to help you out.
Used Inventory

Used National Box & Pan Brake
48'' 12 ga - Model # U4812

Used Bridgeport Series 1 with Acurite 3 axis MilPWR
2001 Power Draw Rod
EXCELLENT CONDITION – very low hours
Including:
· 9’’x 48’’ Table
· 2 HP 220V /3/60 R8 spindle
· Manuals included
· Built in 2001
· 30” x 12” x 5” travels
Used GMC - GML-1440HD

Heavy Duty Gap Bed Lathes Specifications:
Max. swing over bed - 14-7/8”
Max. length of workpiece - 40”
Max. swing over cross slide - 10-1/16”
Max. Swing in gap - 23-1/4”
Width of Bed - 10-1/4”
Effective length in gap to spindle - 8-1/2”
Effective length in gap to chuck jaws - 3-1/2”
Spindle bore - 2-1/16”, D1-6
Taper of spindle center -M.T.# 6 (with MT6/MT4 (sleeve)
Spindle speeds - 45-1,800 rpm / 16 steps
Longitudinal feeds - 0.0018-0.07 IPR, 42 kinds
Cross feeds - 0.0009-0.03 IPR, 42 kinds
Inch threads - 70-2 TPI, 45 kinds
Metric threads - 0.2-14 mm, 39 kinds
Module threads - 0.3-3.6 mm, 18 kinds
Diametral pitch threads - 8-40 DP, 21 kinds
Max. travel of top slide - 4-1/4”
Max. travel of cross slide - 8-1/2”
Spindle length w/o chuck - 20-1/2”
Lead screw dia. x TPI - 1-1/4” diameter x 4 TPI
Diameter of tailstock quill - 2-1/16”
Max. travel of tailstock quill - 5”
Headstock size - 16” x 17”
Taper of tailstock quill center - M.T. # 4
Main motor - 6 HP, 220V only, 3 phase
Coolant pump motor - 1/8 HP, 220V only, 3 phase
Net weight, approx. - 4,350 LBS
Overall dimensions, L x W x H - 79” x 38” x 53”
Buyer to Verify Specifications
Used GMC - Vertical Knee Type Mill GMM-949VPKG

Specifications
Table Size 9” x 49”
Table Load Capacity 650 lbs.
X Axis Travel 35 ½”
X Travel with Power Feed 31 ½”
Y Axis Travel 12”
Z Axis Travel 17”
Spindle Taper Type R8
AC Spindle Motor 3 HP
Spindle Speeds 70-4,300
Quill (Spindle) Diameter 3 3/8”
Quill (Spindle) Travel 5”
Ram Travel 12”
Table T-Slot Size 5/8” x 3 slots
Net weight 2,650 lbs.

Used Bridgeport 2J Mill
Acurite 2 Axis MILPWR
Part Probe Included
1989 Excellent Condition
-
2 HP/3/60/230
-
Variable Speed 4500 rpm Spindle
-
Quick Change Tool System Included
-
Used 6" Vise
-
2 Hours of Training Included
(Denver Metro)
-
Work Light